Products List

316L, 718, 625, Ti6Al4V, AlSi10Mg Other grades and chemistry are available upon request

Stainless Steels, Super Duplex, Nickel Alloys, Super Alloys, Titanium

Metals and mining market participants like you have been turning to Fastmarkets for help in evaluating opportunities and risks for more than 130 years. Supply chains are constantly moving and metals prices fluctuate while the lasting impact of Covid-19, the war in Ukraine and the pull of decarbonization create uncertainty in the market. Fastmarkets metals and mining team works with those involved in the buying, selling and trading of metals to deliver truly market-reflective prices and insights to successfully enable global trade. Combining the commodity intelligence of familiar names like Metal Bulletin, American Metal Market, Scrap Price Bulletin, Industrial Minerals and more, our product breadth and geographic reach remain unmatched. Talk to our experienced, global team and discover more than 900 prices and news and analysis in primary and secondary metals markets. We cover base metals, industrial minerals, ores and alloys, steel, scrap and steel raw materials.

Our Additive Manufacturing technologies hold the potential to displace existing technologies with reduced material waste and increased part complexity. Melt Spinning casts a thin ribbon of rapidly quenched amorphous material in 100g batches, suitable for Al, Fe, Ni, and Cu alloys. HIP compresses a volume of metal powder at high temperature and pressure, causing deformation, creep, and diffusion to create a homogenous annealed microstructure (compact solid) with minimal or no impurities. Meanwhile our research CIP is used to form powders into a green body, prior to sintering, through the pressing of various shapes, including discs, bars, and tubes. Field Assisted Sintering Technology/Spark Plasma Sintering (FAST/SPS) uses electrical currents to heat a mould and/or sample. This method allows high heating rates and low processing cycle times. FAST/SPS offers new possibilities to manufacture numerous materials with potentially extraordinary characteristics. The Fenn Hot Rolling Mill has been designed specifically for the University of Sheffield to roll steels, titanium alloys, and nickel-based alloys from a maximum starting thickness of 80mm to a finished thickness of 3mm. The Conform extruder can take former wastes, such as powder from near-net-shape production or swarf from machined components, and produce useful wire. These processes offer new, unique pathways in the processing of novel alloys, or valorisation of waste streams for new recycling and sustainability models in metal manufacturing.

The mini workshop for on the go Now with a variable speed range from 3,000 to 10,700 rpm – making it ideal for all 6 mm shaft tools, the MINI FIX HOOK & LOOP (velcro), ROLOC™ or PINLOC system. Particularly robust extension arm for a wide variety of jobs anywhere. Mini linear, angle and cut-off grinder in one! Features: Variable speed range from 3,000 to 10,700 rpm with tacho-generator for constant speed even under load. Indispensable for maintenance, repair, fitting work, motor vehicles, paint workshops, and much more. Can also be used as a drive motor for flexible shafts with a 6 mm shaft. Also ideal for all ROLOC™ and PINLOC systems. Perfect ergonomics for longitudinal grinding. Extensive range of grinding tools for any grinding task on stainless steel, steel, non-ferrous metals, aluminium, wood, and plastics. For grinding jobs in hard-to-reach places (corners, edges, internal tanks, etc.), coarse grinding, fine grinding, satin finish, matt finish, polishing to a mirror finish, mini-cutting and cut-off grinding. Can be used with the ball joint mount for secure fixing of the drive motor, including for work with the flexible shaft or as a stationary grinder. Powerful 18-volt special motor - made in Germany.

From standard Bright / Mirror finishes to our UltraMarine, we process sheets from 2000 x 1000 up to 4000 x 1500 wide. On Hot Rolled stainless steel plate we offer a Commercial Bright Finish.

We support researchers who use modelling and simulations themselves, but also provide a route for new collaborations between industry and academia or between simulation and experiment. Our goals are to: Accelerate innovation in materials through physics-based modelling and computational simulation. Enable data-centric and AI-based materials research. Facilitate collaboration to exploit complementarity in simulation and experiment and bring together academia and industry. The Modelling and Simulation Research Area is integral to all Royce activities and serves as a key pillar of the Institute’s Materials 4.0 strategy, which drives the acceleration of materials innovation through digital methods. This includes support for the new Royce Centre for Doctoral Training in Developing National Capability for Materials 4.0.

Modernization solutions that enhance productivity, efficiency, and long-term competitiveness.

EDC Protection's aluminised garments and accessories for molten aluminium are made from a technical fabric consisting of cotton, F-acrylic and FR flame-retardant viscose. Aluminised + PPE is made from a fabric consisting of cotton, F-acrylic, FR flame-retardant viscose, para-aramid and carbon. Alu and Alu + garments are distinguished not only by the composition of their fabric but also by their level of performance in accordance with the EN 11612 standard on indices D and E. Indeed, Alu + garments offer the maximum performance of 3 for the D (molten aluminium projections) and E (molten metal splash) indices against 2 for Alu garments.This range of personal protective equipment is specifically designed to protect against thermal risks from contact with or splashing of molten aluminium and molten metal. Jackets, trousers, coveralls, caps, oversleeves and hoods are available.

At Monitor, we develop the ERP system “Monitor G5” – a complete ERP system, optimized for manufacturing companies. With close to 50 years’ experience of the manufacturing industry, we are the market leading supplier of ERP systems in Sweden. Monitor G5 is developed in close collaboration with our customers. That makes it both user-friendly and cost effective.

Mounted Flap Wheels Joysun mounted flap wheel products feature vertically fitted flaps configured into a fan shape by the way of bonding a high quality flexible abrasive cloth with a two component phonic epoxy. These mounted flap wheels are produced to achieve a higher level of grinding effectiveness with improved stock removal effects for a finer surface finish. The mounted abrasive flap wheels are perfect for grinding small contours and hard to reach surfaces on workpieces such as valves, fittings, dies and molds. Thanks to their flexibility and uniform wear rate of the abrasive aluminum oxide cloth, Joysun mounted flap wheels can offer superior performance at peripheral grinding speeds and these mounted flap wheels are universally suited for applications that require coarse grinding in preparation for polishing of all ferrous and non-ferrous materials, including stainless steel, iron, brass, aluminum, plastic, fiberglass, wood and glass.

MT-1H is a single-sleeve semi-automatic hot mounting machine with a 7-inch touch screen and an easy-to-operate interface