The TSS is an ultrasonic immersion system that offers automated inspection of metallic and composite rod, bar and tube.

Whatever your consumable bend tooling requirements or frequency, we’ll supply to order or create a bespoke tooling agreement that meets your needs perfectly – holding the wiper dies, mandrel balls, mandrel wires, links and other stock you require at one of our UK, USA or partner facilities for scheduled and swift, on-demand delivery. Unison Consumable Tooling Agreements allow our customers to take advantage of shorter lead times, reduced on-site stockholding levels and significant cost savings. Unison launches new consumable tooling service As well as consumable bend tooling, we also produce long-life precision tooling for the most challenging of tube manipulation applications. Choosing Unison consumable tooling means: Scheduled and on-demand consumable tooling delivery Much faster delivery times than made-to-order tools Eliminate the risk of a tooling shortage stopping production Standardise the tooling used across all your facilities Reduce the stockholding and value of tooling you keep on site Save money – volume discounts and convenient, regular payments If a consumable tooling agreement isn’t for your business, we also offer one off orders, allowing you to get the consumable tooling supplies you need on short lead times.

With precise, all-electric operation, user-friendly programming, rapid tool changes and uncompromising accuracy and repeatability, Unison Breeze machines have redefined tube bending. Widely seen as the ultimate tube bending machines by specialist manufacturers and subcontractors, Unison Breeze models deliver right-first-time repeat tube bending, using feedback from our very own Opt2Sim Scan 3D measuring device, or from brands such as Romer, Faro, AICON and Creaform. Intelligent solutions, such as our rise and fall pressure die (which allows tools of different radii to be used during a production cycle), barcode tooling, laser springback correction and servo-rake wiper adjustment offer significant operational savings. As does each Breeze machine’s exceptionally low energy consumption – typically one tenth of that used by an equivalent hydraulic machine. Add exceptional power and control for high-quality thin wall bending, and Unison Breeze machines make light work of challenges where other tube benders may struggle.

TURBO-CUTTER features an innovative spiral-shaped rib design that creates a ventilating and cooling effect during cutting operations. This advanced design significantly reduces side friction and heat generation, resulting in: • Ultra-fast and precise cuts • Up to +70% longer disc durability compared to the discs of previous generation • Reduced working time and operating costs • Greater rigidity and improved comfort of use Thanks to the use of premium abrasives and a cutting-edge formulation, guarantees high and constant cutting performance until the end of the disc. Designed for professional users who demand maximum efficiency, reliability, and safety, represents a new benchmark in cutting performance.

The TWS is a 3-axis ultrasonic immersion system that offers automated inspection of composite web structures.

Here is an example of a vacancy that Comton Group would typical source candidates for. Check out the video link for more details.

The brand-new Tyrolit ONE product line offers you the known benefits at an entry-level price. For all tasks on steel and stainless steel – the reliable tools are not only perfect for ambitious D.I.Y projects, they can also be used for professional applications. With ONE you get fast, comfortable and safe tools for a wide range of applications. • Tyrolit quality, at a smart price. • Over 40 Product lines available. • Slitting, Cut-off and Grinding discs available from 115mm - 230mm. • Flap discs available in 115mm & 125mm. • UK stocked products.

Denholm Good Logistics delivers a full range of road haulage solutions, from full truckload transport to specialist cargo handling.

Capacity to hold approx 3000 tonnes of material. In our Chesterfield warehouse. Capability to offer uniform cutting upto 500mm diameter, packed into our own rotational packaging. Delivered to the customer on our own transport.

A modern, fully equipped laboratory enables macroscopic and microscopic examinations. All equipment and machines are either annually calibrated by a UKAS-accredited calibration company or calibrated using in house methods. We perform an in house check daily to ensure continued rigorous compliance with quality standards. Mechanical Tests ASTM A262 Practice C corrosion tests ASTM A262 Practice E corrosion tests ASTM A370 Charpy V notch impact tests (-56°C to -195°C)* ASTM A370 Charpy V notch impact tests (+20°C to -55°C & 196°C) ASTM E23 Charpy V notch impact tests (-56°C to -195°C)* ASTM E23 Charpy V notch impact tests (+20°C to -55°C & 196°C) ASTM G48 corrosion tests Bend testing (ASME and BS) Bend tests (face, root and side bends) Brinell hardness testing* BS Charpy V notch impact tests (+20°C to -55°C & 196°C) BS Charpy V notch impact tests (-56°C to -195°C)* Chemical analysis Elevated temperature tensile tests Failure investigations Ferrite point counting Fracture testing (fillet weld or butt weld fractures) Microscopic examination (grain size and phases)* HV10 Vickers hardness survey HV5 Vickers hardness survey HV30 Vickers hardness survey IZOD test* Macroscopic examinations (including photomacrographs) Micro hardness testing* Microscopic examination for weld defects OES spark chemical analysis (Not UKAS Accredited) Photography (Not UKAS Accredited) Positive Material Identification (PMI) (Not UKAS Accredited) Push/compression testing (Not UKAS Accredited) Rockwell C hardness survey* Room temperature longitudinal tensile tests (0.2% proof stress, 0.5% yield strength, UTS, reduction of area and % elongation) Room temperature longitudinal tensile tests (UTS, reduction of area and % elongation only) Room temperature transverse tensile tests (0.2% proof stress, 0.5% yield strength, UTS, reduction of area and % elongation) Room temperature transverse tensile tests (UTS, reduction of area and % elongation only) Through thickness tensile test Weld decay bend testing*

We are one of the leading Non-Destructive Testing (NDT) companies. Our services are extremely thorough and we provide individual and detailed reports for each method of NDT testing in Manchester. Our work typically addresses weld integrity for carbon steels, stainless steels, alloys, components, all structures and vessels. We work precisely to customer specifications and test raw materials as well as components – from large gas silos, bridges and staircases to small aerospace components, floor claddings, overlay build-up on corroded surfaces and hard facing build-up on digger buckets. Liquid dye penetrant testing, magnetic particle testing and many more NDT methods are available. Our Non-Destructive Testing (NDT) services include: Visual Inspection (CSWIP and PCN) Liquid Dye Penetrant Inspection Portable Hardness Testing (Not UKAS Accredited) Magnetic Particle Inspection Ultrasonic Inspection Positive Material Identification (PMI) (Not UKAS Accredited) Radiography (Not UKAS Accredited) In-house and on-site Non-Destructive Testing Methods Our Non-Destructive Testing services can be carried out in-house as well as at customers’ sites, with our team of NDT technicians able to travel nationwide with all the equipment needed to carry out the required tests from liquid dye penetrant testing to magnetic particle inspections.

Boxford UV Lasers are capable of marking and engraving almost any material, including metals and non-metals. Transform your engraving and part marking capabilities with one easy to use, high-definition marking and engraving machine. The BMU110 is capable of marking and engraving text, logos, QR codes, bar codes, vectorised images and even photographs!

VACODUR 49 offers the highest Saturation for any motor design and is widely used in Aerospace and Racing applications.

PRODUCT DESCRIPTION The family of VACODUR® alloys has been developed for more demanding requirements with respect to high strength combined with high saturation. The yield strength can be adjusted by varying the heat treatment temperature. The yield strength of VACODUR Max can be set over a wide range from 150 to 400 MPa. This makes the material especially suitable for applications in electric motors: stator and rotor laminations can be stamped from the same strip to achieve the most efficient use of material before undergoing different heat treatments in order to attain a magnetically optimized stator and a mechanically optimized rotor with defined yield strength. For even higher yield strengths please refer to VACODUR S Plus